Filter
Top Products
Configuring the conference system
62
Monitoring initialized conference units – “Unit monitoring“
̈ In the main navigation, click “Conference management” > “Unit
monitoring”.
The “Unit monitoring” overview screen is displayed.
The following information on the initialized conference units is displayed:
The information on the conference units is not automatically refreshed.
To refresh the information:
̈ Click “Refresh Unit Table”,
The information is refreshed.
To clearly identify the conference units initialized with the system:
̈ Click “Test LEDs ON”.
The indicators and displays of the initialized conference units light up.
Information Function/Meaning
“Units initialized“ Number of conference units that are initialized with
the access point and currently switched on
“Units in init list“ Number of conference units that are manually
initialized with the access point
“Microphone Number“ 4-digit microphone number
“Serial Number“ Serial number of the conference unit
“Status“ Connection status between access point and
conference units:
•“Connected“
•“Disconnected“
“Link Quality“ Link quality between access point and conference
units:
•“Excellent“
•“Good“
•“Fair“
•“Low“
“Battery Status“ Remaining operating time in hours