Filter
Top Products
Switching the components on/off
32
To manually switch a conference unit off:
̈ Press the microphone key A for 3 seconds.
The conference unit switches off. All LEDs and displays go off.
To automatically switch all conference units off:
̈ Switch the access point off (see page 29).
If there is no connection to an access point, the conference units will
automatically switch off after 2 minutes.
To completely switch a conference unit off and disconnect it from the
power supply:
̈ If necessary, unplug the charging power supply from the wall socket.
̈ Remove the battery pack from the conference unit (see page 27).
Setting the
initialization mode of
the conference units
To initialize the conference units on
the access point
see page 57
Encryption mode To set the encryption mode for radio
transmission
see page 67
Configuration Function/Meaning
Detailed
information
A
:
:
C CV D DV
3s
NT-BA
C CV D DV
X
]