51
Configuring the conference system
̈ Press the Enter key.
The web server appears in the browser window.
Setting the country-specific limit values – “Country selection“
To set the conference system to the country-specific limit values for radio
systems:
̈ In the main navigation, click “Setup” > “Country selection”.
The “Country selection” overview screen appears.
̈ From the “Country selection” drop-down list, select the country in
which the conference system is to be used.
If you have forgotten the new IP address, you can reset the access
point to the factory default settings in order to be able to access
the web server (see page 44).
Attention: If the access point is reset, any custom settings will be
lost!
If you want to integrate the access point into a managed network
in which only selected devices are allowed to be integrated, you
have to assign your router or switch the MAC address of the access
point. You can find this MAC address on the “Summary” overview
screen (see
page 49).
CAUTION! Risk of violation of legal requirements!
If you are using radio frequencies and transmission powers
that cannot be used license-free in your country, there is a
risk of violation of legal requirements.
̈ Use only radio frequencies and transmission powers that
are approved and legal in your country.
̈ From the “Country selection” drop-down list, select the
correct country is which the conference system is to be
used.