158 HP Jornada 700 Series Handheld PC
Options tab described in the previous step, clear the Cancel
the call if not connected within option or increase the
number of seconds allowed.
Able to dial out, but unable to make a proper
connection
• Verify that the network you are attempting to connect with
supports PPP (Point-to-Point protocol) or SLIP (Serial Line
Internet Protocol).
• Verify that you have the correct dialing location selected. On
the Start menu, point to Settings, tap Control Panel, and
then double-tap the Dialing icon. Make sure that the location
settings reflect your current location, that the dialing pattern
for the location is appropriate, and that the local country and
area code are correct.
Connection is unreliable
• Make sure the modem is firmly seated and connected to both
your HP Jornada and the telephone jack.
• Disable call waiting. On the Start menu, point to Settings,
tap Control Panel, and then double-tap the Dialing icon.
Select Disable call waiting by dialing and enter the disable
code specified by your telephone company.
Network connection is not listed in the ActiveSync
dialog box
• Close the dialog box, wait a few minutes, and try again.
• Reset your HP Jornada. (See the Resetting section in this
chapter.)
Infrared transfer between MS Windows for H/PC
2000–based devices
If you are unable to transfer information between H/PC 2000
devices by infrared, try the following.
• Transfer only one file, or no more than 25 contact cards, at a
time.