Filter
Top Products
Chapter 9 CallPilot operations 95
CallPilot 150 Telephone Administration Guide
To set the Business Status
Changing greetings or the Business Status from a remote
telephone
You can change a greeting or the Business Status from the dialpad of external tone dial telephone.
You must do remote administration through the System Administrator Mailbox. For information
about remote administration, refer to the CallPilot Reference Guide.
Setting up line answering
CallPilot can answer all your Central Office (CO) lines included in line configuration. You can
designate whether or not CallPilot answers your company lines. When Answer Lines is enabled,
CallPilot answers the incoming calls and presents each caller with the Company Greeting and the
Automated Attendant menu. When Answer Lines is disabled, CallPilot does not answer incoming
calls. Your receptionist must answer and route incoming calls.
For more information about line configuration, refer to “Configuring line answering” on page 49.
To assign Answer Lines
1 Press ≤·°¤.
2 Enter the Operator password and press OK
.
3 Press NEXT
.
4 Press CHNG
to toggle between Y and N.
5 Press ® to end the session.
1 Press ≤·°¤.
2 Enter the Operator password and press OK
.
3 Press NEXT
.
4 Press NEXT
.
5 Press CHNG
.
If you set Answer Lines to N the display shows:Disabling...
If you set Answer Lines is set to Y the display shows: Enabling...
6 Press ® to end the session.
Pswd:
RETRY OK
Atdt avail: Y
CHNG NEXT
Business open: N
CHNG
NEXT
Pswd:
RETRY OK
Atdt aval: N
CHNG NEXT
Business open: N
CHNG NEXT
Answer lines? N
CHNG NEXT