Filter
Top Products
72 Chapter 7 Working with CCR Trees
P0919416 03
Adding a Transfer node
A Transfer node directs a caller to an internal or an external number. You can add a Transfer node
to a CCR Tree at any time.
To add a Transfer to an internal extension
1 Press ≤·°‹.
Enter the System Administrator Mailbox number and password,
and then press OK
.
2 Press OTHR
.
3 Press CCR
.
4 Press ADMIN
.
5 Enter the number of the CCR Tree you want to add a Transfer node
to and press OK
.
6 Press CHNG
,
7 Enter the Path number and press OK
.
For example, to create a Transfer node on the second level of a CCR
Tree, enter ⁄⁄. The first 1 is the path of the first level Menu
node. The second digit is the path where you want to create the
Transfer node.
8 Press OTHR
.
9 Press XFER
.
10 Press INT
.
11 Enter the extension.
12 Press END
.
13 Press SAVE
.
14 Press YES
.
15 This display appears briefly.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY OK
Tree: x
CHNG QUIT
Path:
RETRY END OK
x
MENU INFO OTHR
x
XFER LVMSG OTHR
Transfer
EXT INT
Ext:
RETRY OK
Path:
RETRY END OK
Tree: x
SAVE QUIT
Save as tree x
YES
OTHR QUIT
Tree saved