Filter
Top Products
36 Chapter 4 Working with mailboxes
P0919416 03
About Group Lists
You can create a maximum of 99 Group Lists on your system. Each Group List can contain a
maximum of 300 mailboxes. Before you add Group Lists, prepare a group mailbox member list.
This list must contain:
• the Group List name – maximum 16 characters long
• the mailbox numbers to include in the group
After you create a Group List, you can change the mailboxes included in the list, record a new list
name, view the Group List, or delete the Group List.
About Sending Group List messages
You can send a Group List message whenever you want to notify a group of people about an event
or notice that pertains to them. When a subscriber sends a message to the Group List, the
subscriber does not receive the message.
For instructions on how to send a Group List message to a Voice Group List, refer to the CallPilot
Reference Guide.
About Group List Numbers
During system installation, a number from 0 to 9 (default 9) is assigned as the Group List leading
digit. For example, the default Group List numbers are 901 to 999. If the leading digit is 5, the
Group List numbers are 501 to 599. Group List numbers are three digits long.
You can change the Group List leading digit. For more information on changing the Group List
leading digit, refer to “Group List leading digit” on page 98.
The Group List number acts like a mailbox number when you leave a message for the mailboxes in
the Group List. The table below shows two sample Group Lists.
This table shows an example of a Group List
Group List number Name Mailbox number
901 Sales 224
223
233
902 Shipping 227
221