Filter
Top Products
Chapter 11 Troubleshooting CallPilot 119
CallPilot 150 Telephone Administration Guide
Mbox nearly full
Appears if the maximum message storage time is almost reached in a mailbox.
This is determined by the Class of Service. Tell the subscriber to delete any
unnecessarily stored messages in the mailbox. This message appears when a
subscriber first logs on to the mailbox. Messages cannot be stored in this mailbox
until some are deleted.
Mbox not init
Appears if an attempt is made to access a mailbox that is not initialized.
Must change pswd
Appears if you try to access a mailbox that is not initialized. Initializing a mailbox
includes changing the default password.
Must record name
Appears if a mailbox owner’s name is not included in the Company Directory.
Name too long
Appears if you add or change a mailbox owner’s name and the characters exceed
the allowable limit of 16. The maximum length includes the comma.
No dir available
Appears if the Company Directory is empty. Either CallPilot mailboxes have not
been initialized by the subscribers, or there are no mailboxes added to CallPilot.
No glist avail
Appears if the maximum number of Group Lists is assigned. The maximum
number of Group Lists is 99.
No match
Appears if a mailbox owner is not found that is similar to the characters entered
when using the Company Directory. Check the spelling of the mailbox owner’s
name.
No mbox avail
Appears if the maximum number of mailboxes is added to CallPilot. The maximum
number of mailboxes is 300. This number includes the System Administrator and
General Delivery Mailboxes. The maximum number of subscriber mailboxes on
CallPilot 150 is 200.
No msg notify
Appears if Off-premise Message Notification is not enabled. Off-premise Message
Notification is assigned in the Class of Service.
No party connect
Appears if you try to transfer a call before establishing an active call.
No previous msgs
Appears if the first message in a mailbox is playing, you enter the command to
play the previous message.
Vm busy
Appears if the maximum number of users are accessing CallPilot.
Message Meaning