Filter
Top Products
Chapter 5 Setting up the Automated Attendant 49
CallPilot 150 Telephone Administration Guide
Configuring line answering
CallPilot can answer all of your incoming lines, or just the lines you specify. Before CallPilot can
answer an incoming line, you must assign the line and set the Answer status to Yes. Each line you
add is answered by Greeting Table 1, unless you specify another table.
To configure how a line is answered
1 Press ≤·°‹.
Enter the System Administrator Mailbox number and password,
and then press OK
.
2 Press AA
.
3 Press LINES
.
4 Enter the number of the line you want to configure and press OK
.
5 Press CHNG
to toggle the Answer status from N to AA.
6 Press TABLE
.
7 Press CHNG
.
8 Enter a Greeting Table number from 1 to 4 and press OK
.
9 If you want to continue adding lines, press NEXT
and repeat steps 5
to 9
or
press ® to end the session.
Log:
QUIT RETRY OK
Admin
MBOX AA
OTHR
Auto Atdt Admin
GRTG TABLE LINES
Line number:
RETRY OK
Line:1 Ans:N
CHNG
TABLE NEXT
Line:1 Ans:AA
CHNG TABLE
NEXT
Line:1 Table:1
CHNG
RINGS NEXT
Grtg table:
RETRY OK
Line:1 Table:1
CHNG RINGS NEXT