Filter
Top Products
25
CallPilot 150 Telephone Administration Guide
Chapter 4
Working with mailboxes
Adding a Subscriber mailbox
Assign all Subscriber mailboxes mailbox numbers that begin with the same digit. This helps you to
identify the mailbox type. If the system times out before you enter all the values for a mailbox, use
the procedures in “Changing a mailbox” on page 32 to finish setting up the mailbox.
To add a Subscriber mailbox
1 Press ≤·°‹.
Enter the System Administrator Mailbox number and password,
and then press OK
.
2 Press MBOX
.
3 Press ADD
.
4 Enter the mailbox number.
5 Press OK
.
6 Enter the extension number.
7 Enter a Class of Service from 1 to 16.
8 Enter the mailbox owner’s last name, press ££, enter the mailbox
owner’s first name or initial, and then press OK
.
The name can be a maximum of 16 characters.
For information on entering names using the telephone dialpad,
refer to “Using the dialpad” on page 12.
9 Press YES
if you want the Subscriber’s name to be included in the
Company Directory.
10 Press YES
if you want the Subscriber to have Message Waiting
Notification.
11 Press NEXT
if you do not want to assign outdialing and go to step 15
or
press CHNG
.
Log:
QUIT RETRY OK
Admin
MBOX
AA OTHR
Mailbox Admin
ADD
DEL CHNG
Mbox:
RETRY QUIT
Type:subscriber
NEXT OK
Ext:
RETRY OK
Service class:
RETRY OK
Name:
RETRY BKSP OK
Directory?
YES NO
Msg waiting?
YES NO
Outdial: <none>
CHNG NEXT