Filter
Top Products
120 Chapter 11 Troubleshooting CallPilot
P0919416 03
Not allowed
Appears if:
• a subscriber is not allowed access to a feature or Feature Code
• a subscriber tries to access the Configuration or Operator Status feature
codes
• the message recorded has too many Forwards and Replies
• a recorded message reaches its maximum number of segments. This is
caused by repeatedly using “pause” and “continue” while recording a
message
• a Group List number is entered as a mailbox member of another Group List. A
Group List number cannot be added to a Group List.
Not recorded
Appears if you try to play a Primary or Alternate Greeting before it is recorded.
Options cancel
Appears if you cancel Delivery Options while you are sending a message.
Out of space
Appears if the CallPilot Message Storage capacity is full. You must delete old
messages from the General Delivery Mailbox and tell subscribers to delete any
unnecessarily stored messages from their mailboxes.
Party not avail
Appears if a subscriber tries to use the Reply feature to reply to an external call,
but there is no Caller ID (CLID) contained in the message left by an external
caller.
Pswd too long
Appears if a password exceeds eight digits. A password must be between four
and eight digits long.
Rec too long
Appears if a recorded message is too long. Message or greeting length for a
mailbox is determined by the Class of Service.
Rec too short
Appears if a recorded message is too short.
Speak up
Appears if you record a greeting or message and do not meet the minimum
volume level. Do not use Handsfree. Speak directly into the handset of your
telephone.
Not enabled
Appears if Group Lists are not enabled.
Message Meaning