Filter
Top Products
Chapter 7 Working with CCR Trees 81
CallPilot 150 Telephone Administration Guide
Changing a destination type
You can assign destination types only to Information and Mailbox nodes. For more information
about destination types, refer to “Destination types” on page 60.
To change a destination type
1 Press ≤·°‹.
Enter the System Administrator Mailbox number and password,
and then press OK
.
2 Press OTHR
.
3 Press CCR
.
4 Press ADMIN
.
5 Enter the number of the CCR Tree that you want to change and
press OK
.
6 Press CHNG
.
7 Enter the Path number of the node you want to change and press OK
.
8 Press CHNG
.
The display shows Info if you are changing an Information node.
9 Press NEXT
.
10 Press CHNG
.
11 Change the destination type:
press PREV
return the caller to the previous menu
or
press HOME
to return the caller to the Home node
or
press DISC
to disconnect the call.
12 Press OK
.
13 Press END
.
14 Press SAVE
.
15 Press YES
.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY OK
Tree: x
CHNG QUIT
Path:
RETRY END OK
x xxx
CHNG ERASE OK
Mbox: xx
CHNG NEXT
Dest: xxxx
CHNG OK
Destination?
PREV HOME DISC
Dest: xxxx
CHNG OK
Path:
RETRY END
OK
Tree: x
SAVE
QUIT
Save as tree x
YES
OTHR QUIT