Filter
Top Products
Chapter 10 Dialing Translation 109
CallPilot 150 Telephone Administration Guide
Building a Dialing
Translation Table
To build a Dialing Translation Table, you must enter an Input value and an Output value for each
entry. The Input value is the number that the CallPilot 150 looks up in the Dialing Translation
Table. If the corresponding entry matches, the system substitutes the Output value for the Input
value. The resulting number is ready to dial on the local network. Refer to “An example of a
Dialing Translation Table from a site in metropolitan Toronto” on page 106.
To build a Dialing Translation Table
1 Press ≤·°‹.
Enter the System Administrator Mailbox number and password,
then press OK
.
2 Press
°°
. This option does not appear as a display button option.
3 Press TABLE
.
4 Press ADD
.
5 Enter an input value up to 14 digits.
6 Press OK
to accept the input value
or
press RETRY
and enter a new input value.
7 Enter an output value up to 15 digits.
8 Press OK
to accept the output value
or
press RETRY
and enter a new output value.
9 Press ® to end the session.
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Dialing
PARM TABLE QUIT
Dial Table
ADD CHNG QUIT
In: xxx
RETRY OK
xxx
RETRY OK
Out:
RETRY OK
xxx
RETRY OK
Dial Table
ADD CHNG QUIT