Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 68 June 07
o Authentication Password – Specifies the user Password for authentication of the
phone.
o Line Type – Select a line type of Private, Shared, or DSS Line.
o Extension for DSS – Specifies the extension number when the Line type is DSS;
do not enter an Extension number unless the Line type is DSS.
- General Parameters
o Outbound Proxy Address – IP address or FQDN of outbound proxy server to use
in place of the Line-based Proxy Server to receive SIP requests.
o Outbound Proxy Port – Port of the outbound proxy server, used in place of the
Line based Proxy settings
o Backup Proxy Address – IP address or FQDN of the backup proxy server, used
when the connection with the primary proxy times-out.
o Backup Proxy Port – Port of the backup proxy server
o Domain – Specifies the Domain for SIP Service when the service provider desires
to use a specific SIP domain.
o VMS Address – Specifies the address (IP or Phone) of the Voice Mail Server.
o Proxy Registration – Enable SIP registration to the proxy; this parameter is
ignored if a SIP proxy server is not specified.
o Registration Timer – SIP registration interval (seconds) between each registration
renewal to the SIP proxy server.
o Local UDP Port – Specifies the UDP port used for sending and receiving.
o Start RTP Port – Specifies the port to use for Real-time protocol (voice) packets.
o Codec – Sets the priority for audio codecs.
o Centralized Conference - Enables or diables Centralized Conference audio
processing conferences. When enabled, the Server is expected to provide a
single RTP stream for the conference. When disabled, the separate RTP streams
are provided for each participant and the Phone must process the the RTP
streams. Also, sets the URL for the central conference server.
o Broadsoft BLF – When enabled, all DSS Line types will register to and receive
BLF (Busy Lamp Field) indication from the defined URL.
To modify a parameter:
1) Select the parameter, and modify the value.
2) Select the .. button.
Changing the proxy server address, proxy port by line and outbound proxy, backup
proxy, VMS address or local UDP port requires a reboot of the LIP-6812/LIP-6830;
when you leave the menu, you will receive a Reboot notice.