Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev.01.04 A-1 June 07
Appendix A. Factory Default Configuration
Factory default configurations are settings for the configuration which are set at the factory. The
default values for configurable settings are given in Table A below.
Config File
Section Name
Parameter/Field Default Value
Network Mode DHCP
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.254
Primary DNS Address 0.0.0.0
Secondary DNS Address 0.0.0.0
Domain Name* Not Assigned
TFTP Server address Not Assigned
TOS (Type of Service)* 0
PC port VLAN Priority 3
PC Port VLAN Id 0
LAN port VLAN Priority 5
[LAN]
LAN port VLAN Id 0
Call Server Address line 1 0.0.0.0
Proxy Port line 1 5060
Display Name line 1 Not Assigned
Name line 1 Not Assigned
Auth. Username line 1 Not Assigned
Auth. Password line 1 Not Assigned
Line 1 Line type Private
Extension for DSS line 1 Not assigned
Call Server Address line 2 0.0.0.0
Proxy Port line 2 5060
Display Name line 2 Not Assigned
Name line 2 Not Assigned
Auth. Username line 2 Not Assigned
Auth. Password line 2 Not Assigned
Line 2 Line type Private
Extension for DSS line 2 Not assigned
Outbound Proxy Address Not Assigned
Outbound Proxy Port 5060
Backup Proxy Address Not Assigned
Backup Proxy Port 5060
Domain* Not assigned
Start RTP Port 23000
VMS Address Not Assigned
prack mode** disabled
User Name* Not Assigned
Replaces header** enabled
[VOIP]
Local UDP Port 5060