Nortel Networks LIP-6812 Telephone User Manual


 
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 19 June 07
3) Press button, or move cursor to 8.VLAN Settings using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press button, or move cursor to 1.VLAN Priority (LAN) using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
5) Input the VLAN Priority for the LAN port using the Dial pad.
6) Press the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
Changing the VLAN Priority for the LAN port requires a reboot of the LIP-6812/LIP-
6830; when you leave the menu, you will receive a Reboot notice.
A VLAN priority of 5 for the LAN port is default and recommended.
To disable VLANs, assign the VLAN ID as ‘0’.
3.4.8.2 VLAN ID (LAN)
The VLAN ID (LAN) assigns the identification for Ethernet frames for the LIP-6812/LIP-6830
voice port including signaling and voice payloads. Setting VLAN ID to 0 disables the VLAN
framing and only standard Ethernet frames are sent.
To assign VLAN ID for the LAN (voice) port:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 8.VLAN Settings using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press button, or move cursor to 2.VLAN ID (LAN) using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
5) Input the VLAN ID for the LAN port using the Dial pad.
6) Press the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
V
LAN Priority (LAN)[0~7]
0
[ » ] [CLR ] [ OK ]
V
LAN ID (LAN)[0-4094]
0
[ » ] [CLR ] [ OK ]