Nortel Networks LIP-6812 Telephone User Manual


 
LIP-6812 & LIP-6830 Installer Guide
Rev. 01.04 D-12 June 07
;================================================================================================
LIP-68XX configuration information(v1.0) ;this line is required; do not remove form Config file.
; copyright LG-Nortel 2006
;================================================================================================
;
; This file can be used as a global configuration file for all LIP-6800 series phones (LIP-6804,
LIP-6812& LIP_6830) and as a phone-specific configuration file. The Global file defines
characteristics common to all the phones using the sysconf_68??d_sip.cfg file name (??= 04, 12,
or 30). Phone-specific parameters are defined in the MAC file; use the phone’s MAC address as
the file name with no extension.
;
;------------------------------Description for configuration file--------------------------------
;
; The configuration file uses the following format
;
; [SECTION NAME]
; Field name value
;
; Make sure there is a space character after the value and before the “;” comments.
; To enter a space character, wrap the entire string in double quotes (“).
; The Configuration file returns the LIP Phone to default when the field is left blank. If the
default is desired, it is recommended no value be assigned for the field in the Config file.
; A Field may be deleted or commented-out from the Config file to use the LIP Phones existing
memory.
;
; ---------------------- SETTINGS -----------------------------------------------------------
; Assure the field/parameter settings are configured to match up with the use of the phone.
;
; The below file is set-up for the 2 lines, which is default, add lines for the specific
configuration.
; -----------------------------------------------------------------------------------------------
;
[LAN]
;Lan configuration
;
network_mode
dns1_address
dns2_address
domain_name
tftp_server_address
tos
pc_802_priority
phone_802_priority
pc_vlan_id
phone_vlan_id
;
[VOIP]
;VoIP configurations
outbound_proxy_server
outbound_proxy_port
backup_proxy_server
backup_proxy_port
SIP_service_domain
preferred_codec
rtp_port
outbound_proxy_register
prack_mode
user_param
replaces_mode
local_udp_port
message_url
timer_register_expires
timer_session
timer_t1
timer_t2
stun_server
centralized_conference
conference_url
max_line_num
;
line1_proxy_address
line1_proxy_port
line1_displayname
line1_name
line1_authname
line1_password