Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev. 01.04 D-13 June 07
line1_type
line1_extension
;
linen_proxy_address
linen_proxy_port
linen_displayname
linen_name
linen_authname
linen_password
linen_type
linen_extension
;Note ‘n” is the line number assigned consecutively to the “max_line_num”.
;!!! Repeat above parameters for each line on the phone up to the “max_line_num” !!!!!!!
;
;
[ROUTE]
;Call Routing Table Configurations
;add intf <port> nums [trunc pre post pause ip-addr]
;add sip 0 0 null null null 0.0.0.0
;
;
[DSP]
;DSP configurations
ringer_off
VAD
dtmf_payload
dtmf_duration
frame_duration
headset_mode
dtmf
ringtype0
ringtype1
ringtype2
ringtype3
ringtype4
ringtype5
ringtype6
cadence0
cadence1
cadence2
cadence3
cadence4
cadence5
jitterbuffer_min_delay
jitterbuffer_nom_delay
jitterbuffer_max_delay
;
[FWRD]
;Forwarding Configurations
condition
forwarding_address
noanswer_time
;
;
[DIAL]
;Dial Configurations
dial_mode
pause_timer
inter_digit_timer
dialplan
digitmap
digitmap_tone
digitmap_process
;
[PROG]
;add prog func [num] ;Entries for programmable buttons. Type the word “add” followed by
space, the button number, space, function number and for speed dials the number to dial. For
message function enter the url, ip address or telephone number for voice mail.
;
; prog = programmable button number, 6804N:3~4, 6812D:3~11, 6830D:3~24
; func = 0 for no function
; 1 for Speed Dial
; 2 for Phone Book
; 3 for Call Log
; 4 for Mute
; 5 for Headset
; 6 for Redial
; 7 for Return