Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev. 01.04 F-3 June 07
NOTE: If a value is changed for a Field Name marked with an asterik in Table D-1, the reboot
flag will be enabled and the LIP Phone will reboot after the download cycle is completed. By
default, the Phone Specific file uses the MAC address of the Phone as the file name with no file
extension. For HTTP/S, a different file name can be assigned in the Phone to use as Phone
Specific Configuration file name.
After completing download of the Configuration files, the LIP Phone will request the software
version file from the server. This file named “LIP_6812_VER_SIP2” or “LIP_6830_VER_SIP2”
based on the Phone model, is an ASCII text file that identifies the software version available on
the server as well as the names of the files to be downloaded. The Phone will first request the
the file “mac address/LIP_68xx_VER_SIP2, if not found, the file LIP_68xx_VER_SIP2 is
requested. The Phone compares the software version identified in the file with the version in
the phone. If different, the files identified in the version file are downloaded; typically the files
required for download include the main firmware file and an xml file but, may include other files
as needed for the upgrade. These files along with the version file are available from LG-Nortel.
If desired, comments may be added to the version file using “#” as the leading character of the
comment line. If desired, comments may be added to the version file using “#” as the leading
character of the comment line.
If the software download is required, after completion of the download cycle the LIP phone will
reboot.
SIP Server Check-in Request
Upon receipt of a SIP check-in request from the SIP server, the LIP Phone will check-in with the
appropriate provisioning server, initiating the provisioning process. The phone must be idle to
iniate provisiong, if busy, upon return to idle, the process will start. During the process, the LIP
Phone will download any configuration file changes as well as new software regardless of the
settings for the software and configuratiion download flags. If any of the Configuration
parameters shown with an asterik in Table D-1 or if new software is download, the phone will
reboot.