Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 47 June 07
6) Input the HTTPS Port using the Dial pad, and press the [ OK ] Softkey to save your
Configuration.
7) Press the button to exit the menu.
Changing the HTTPS Port requires a reboot of the LIP-6812/LIP-6830; when you leave
the menu, you will receive a Reboot notice.
3.6.8.3.3 User Name
In some cases the HTTP/HTTPS server may require a User Name (ID) and Password for
authentication prior to allowing file access.
To set the User Name:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press [ OK ] Softkey.
3) Press button, or move cursor to 8.S/W Update using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press button, or move cursor to 3.HTTPS Provisioning using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
5) Press button, or move cursor to 3.Username using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
6) Input the Username using the Dial pad, and press the [ OK ] Softkey to save your
configuration.
7) Press the button to exit the menu.
Changing the User Name requires a reboot of the LIP-6812/LIP-6830; when you leave
the menu, you will receive a Reboot notice.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
HTTPS Port
443
[ » ] [CLR ] [ OK ]
Username [1]
admin
[ » ] [Mode] [ OK ] ¼