Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 76 June 07
- TRNC – Truncation, defines the number of digits to delete from the dialed number.
- Pre – defines digits to insert in the front of the truncated number.
- Post – defines the digits to insert at the end of the truncated number.
The following are examples of Dial Plans using the Routing Table.
Simple Dial Plan using the Digit Map Table
Process the call after any 7 digit number is dialed or if the Operator is dialed at digit ‘0’.
The digit map for this Dial Plan is (0T|xxxxxxx). From the map, if the user dials 0 as the first
digit, the LIP phone will wait for the pause time for additional digits. After the pause, if no
additional digits are dialed, the phone places a call to the Operator is called. Also, after the user
dials any seven digits, the call is processed.
Complex Dial Plan
Process the call after the local operator at 0, long distance operator at 00, a four-digit local
extension number starting with 3,4 or 5, a seven-digit local number prefixed by an 8, two-digit
number preceded by star (‘*’), a ten digit long distance number prefixed by 91, or an
international number starting with 9011 is dialed.
The dial plan for this is (0T|00T|[3-5]xxx|8xxxxxxx|*xx|91xxxxxxxxxx|9011x.T).
A second 512 character string Map is employed employed to provide 2
nd
Dial Tone.
To change Digit Map Table parameters:
1) Assure the Digit Map radial button is selected under the Dial Plan Type
2) Enter the desired values into the Digit Map respective boxes.
3) Select the button.
To set-up or change a Digit Map to provide second dial-tone
1) Enter the digits in the appropriate test boxes.
2) Click the button.
To modify a Digit Map Process:
1) Enter the digits in the appropriate test boxes.
2) Click the button.
To delete the entries from the Digit Map Process:
1) Select the DEL check-box.
2) Enter the number.
3) Click the button.