Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 21 June 07
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 8.VLAN Settings using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press button, or move cursor to 4.VLAN ID (PC) using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
5) Input the VLAN ID for the PC port using the Dial pad.
6) Press the [ OK ] Softkey to save your Configuration.
7) Press the button to exit from the menu.
Changing the VLAN ID for the PC port requires a reboot of the LIP-6812/LIP-6830;
when you leave the menu, you will receive a Reboot notice.
To disable VLANs, assign the VLAN ID as ‘0’.
3.4.9 CDP
The LIP Phone can be assigned to employ the discovery protocol to determine if VLANs are to
be used and the associated VLAN Id.
To enable the automated discovery process:
1) Press the button. If the LCD Menu is locked, use the unlock procedure 3.3
Lock/Unlock Configuration).
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 9.CDP using the [Next]/[Prev] Softkeys, and press the
[ OK ] Softkey.
4) Select the desired Softkey ([Yes ] or [ No ] to enable or diisable CDP.
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the button to exit from the menu.
V
LAN ID (PC)[0-4094]
0
[ » ] [CLR ] [ OK ]
Enable CDP
Current Value is ‘Yes’
[Yes ] [ No ]