Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 36 June 07
3.6 Phone Settings
Within the Phone Settings selection, LCD contrast, Ring type, Ringer off, Headset Auto mode,
DSS Registration and Flexible button configurations can be viewed and changed.
3.6.1 LCD Contrast
The contrast of the LCD can be adjusted for best viewing.
To adjust the LCD Contrast:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 1.LCD Contrast using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Press the [Down] Softkey to decrease the LCD contrast, or press the [ Up ] Softkey to
increase the LCD contrast.
5) Press the button to exit from the menu.
3.6.2 Ring Type
The LIP-6812/LIP-6830 can be set to provide one of seven distinctive Ring signals or tones. By
assigning different Ring types to closely located phones, the user can quickly identify the ringing
phone.
To set the Ring type:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 2.Ring Type using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Select Ring Type using the [Next] Softkey. Press the [Play] Softkey to hear the the selected
tone.
LCD Contrast
□□□■□□□
[Down] [ Up ]