Nortel Networks LIP-6812 Telephone User Manual


 
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 29 June 07
3) Enter the Line number or move cursor using [Next]/[Prev] Softkeys, and press [ OK ]
Softkey to select a Line.
4) Press button, or move cursor to 9.Extension for DSS using [Next]/[Prev] Softkeys, and
press [ OK ] Softkey.
5) Input the Extension number for the DSS Line using the Dial pad.
6) Press [ OK ] Softkey to save your configuration.
7) Press the button to exit from the menu.
The DSS Extension should only be assigned for a DSS Line. Do not assign a DSS
extension for a Private or Shared Line.
3.5.2 SIP Configuration, General Parameters
Parameters in this section are assigned to configure the overall SIP operation.
3.5.2.1 Outbound Proxy Address
The LIP Phone can be configured to send SIP requests and responses to an Outbound Proxy
Address instead of to the SIP Call Server IP address configured in Section 3.5.1.1. The
address may be an IP address or a FQDN.
To assign an Outbound Proxy address
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 3.Outbound Proxy Addr. Using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
4) Input the Outbound Proxy address for the LIP-6812/LIP-6830 using the Dial pad.
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the button to exit from the menu.
Outbound Proxy Addr [1]
100.1.1.1
[ » ] [Mode] [ OK ] ¼
Enter Ext. for DSS [1]
1234
[ Å ] [Mode] [ OK ] ¼