Nortel Networks LIP-6812 Telephone User Manual


 
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 48 June 07
3.6.8.3.4 Password
In some cases the HTTP/HTTPS server may require a User Name (ID) and Password for
authentication prior to allowing file access.
To set the Password:
8) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
9) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
10) Press button, or move cursor to 8.S/W Update using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
11) Press button, or move cursor to 3.HTTPS Provisioning using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
12) Press button, or move cursor to 4.Password using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
13) Input the Password using the Dial pad, and press the [ OK ] Softkey to save your
Configuration.
14) Press the button to exit the menu.
Changing the Password requires a reboot of the LIP-6812/LIP-6830; when you leave
the menu, you will receive a Reboot notice.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.6.8.3.5 HTTPS URL DHCP Option Number
The custom DHCP Option where the HTTPS Provisioning server URL is located, as a default
Option 160 is employed.
To modify the HTTPS Port:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 3.Phone Settings using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
Password [1]
******
[ » ] [Mode] [ OK ] ¼