Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 15 June 07
3.4.2 IP Address
When the Static IP Address mode is configured, the IP address must be assigned manually.
The LIP Phone requires a valid IP address for proper operation.
To set the IP Address:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 2.IP Address using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Input IP address for the LIP-6812/LIP-6830 using the Dial pad, and press the [ OK ] Softkey
to save your Configuration.
5) Press the button to exit from the menu.
In DHCP mode, the LIP Phone will retrieve an IP Address from the DHCP server.
Changing the IP Address can only be done in the Static mode and requires a reboot of
the LIP Phone; when you leave the menu, you will receive a Reboot notice.
3.4.3 Subnet Mask
When the Static IP Address mode is configured, the Subnet Mask must be configured manually.
To set the Subnet Mask:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 1.Network Configuration using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
3) Press button, or move cursor to 3.Subnet Mask using the [Next]/[Prev] Softkeys, and
press the [ OK ] Softkey.
4) Input the Subnet Mask for the LIP-6812/LIP-6830 using the Dial pad, and press the [ OK ]
Softkey to save your Configuration.
5) Press the button to exit from the menu.
IP Address
192.168.0.2
[ » ] [CLR ] [ OK ]