Nortel Networks LIP-6812 Telephone User Manual


 
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 11 June 07
3.1 LCD Menu Navigation
The LCD Menu is accessed only from the idle state and may be password protected (Locked).
If the LCD Menu is Locked, data may be viewed, however data entry is not possible (refer to
Section 3.3 Lock/Unlock Configuration).
To access the Configuration menu:
1) Press the
button.
To select an item from a menu:
1) Dial the digit associated with the menu item, or use the [Next]/[Prev] Softkeys to move the
cursor and display the item, then press the [ OK ] Softkey.
NOTE: When additional Softkey functions are available, ¼ appears at the bottom-right corner of
the LCD. Use the button to view the next group of Softkey functions.
To return to the previous branch in the menu if
is displayed:
1) Press the button at the bottom left corner of the LCD.
To exit the configuration menu:
1) Press the
button or press the button at the main branch of the LCD Menu.
3.2 Dial Pad Editing of Configuration Values
When you edit the value of a configuration using the Dial pad, the following guidelines apply.
The Dial pad is used to input numbers, letters, special characters, and period. If a configuration
can accept both numbers and letters, the [Mode] Softkey will be available. The [Mode] Softkey
switches the Dial pad entry mode: The mode sign appears in the upper-right corner as [1]
(number), [A] (upper case), [a] (lower case) or [S] (special characters) mode.
To enter letters with the Dial pad, use the digit with the desired letter. Press the same digit
repeatedly until the letter that you want appears. After you enter a letter and pause, the cursor
automatically moves to next letter position. The relation between the Dial pad digits and letters
is shown in Appendix E.
- To enter a period (for example, to input an IP address), press the » key
- To delete a letter in front of the cursor, press the [ Å ] Softkey
- To clear an entire string, press [CLR ] Softkey
To discard any changes you have made, press the
button to move to the previous menu
without saving the entry.