Filter
Top Products
LIP-6812 & LIP-6830 Installer Guide
Rev 01.04 31 June 07
3) Press button, or move cursor to 5.Backup Proxy Address using the [Next]/[Prev]
Softkeys, and press the [ OK ] Softkey.
4) Input the Backup Proxy address for the LIP-6812/LIP-6830 using the Dial pad.
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the button to exit from the menu.
Changing the Outbound Proxy Port requires a reboot of the LIP-6812/LIP-6830; when
you leave the menu, you will receive a Reboot notice.
To enter alpha-numeric characters select the [Mode] Softkey (refer to Appendix E. for
the character mapping of Dial pad digits).
3.5.2.4 Backup Proxy Port
When a Backup Proxy is employed (refer to Section 3.5.2.3), the associated Port must be
defined for the Backup Proxy Port.
To assign the Backup Proxy Port:
1) Press the button. If the LCD Menu is locked, use the unlock procedure (refer to
Section 3.3 Lock/Unlock Configuration).
2) Press button, or move cursor to 2.SIP Configuration using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
3) Press button, or move cursor to 6.Backup Proxy Port using the [Next]/[Prev] Softkeys,
and press the [ OK ] Softkey.
4) Input the Backup Proxy Port for the LIP-6812/LIP-6830 using the Dial pad.
5) Press the [ OK ] Softkey to save your Configuration.
6) Press the button to exit from the menu.
Changing the Backup Proxy Port requires a reboot of the LIP-6812/LIP-6830; when you
leave the menu, you will receive a Reboot notice.
Backup Proxy Address [1]
100.1.1.1
[ » ] [Mode] [ OK ] ¼
Backup Proxy Port
5060
[ » ] [CLR ] [ OK ]