Filter
Top Products
8 How to use this guide
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Conventions and symbols used in this guide
The following conventions and symbols are used for describing features and their
operation:
Prerequisites
If you are a new user, make sure you are familiar with how to operate Enterprise
Edge single-line and two-line display telephones. Refer to Enterprise Edge
telephones on page 9 and read the Enterprise Edge Telephone User Card that came
with your telephone.
For more information about Enterprise Edge Voice Messaging, ask your System
Administrator.
10. About Off-premise Message Notification Explains what Off-premise Message Notification is and
shows how to set up and change Off-premise Message
Notification.
11. Recording a call Describes the Call Record feature.
12. Enterprise Edge Voice Messaging Tips Provides suggestions for the optimal use of Enterprise
Edge Voice Messaging.
13. Troubleshooting Provides helpful procedures for problems that might
occur while operating Enterprise Edge Voice Messaging.
Appendix A: Default values and tone
commands
Provides a list of default values and tone commands.
Glossary Defines terms used in this guide.
Index Provides an alphabetical list of information contained in
this guide.
Convention Example Used for
Word is in a special font (shows
top line of display)
Pswd:
Command line prompts. Used on Enterprise Edge
one line and two line display telephones.
Underlined word in capital letters
(shows bottom line of a two-line
display telephone)
PLAY
Display button option. Available only on Enterprise
Edge two line display telephones
.
You can press the
button directly below the option on the display to
proceed.
Dialpad buttons
£
Represents the buttons you press on the dialpad to
select a particular option.
Chapter Description