Filter
Top Products
66 Off-premise Message Notification
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Off-premise Message Notification parameters
You can set up the parameters for Off-premise Message Notification from any
touch tone phone. The parameters include:
• destination type (telephone, extension or pager)
• destination number (telephone, extension or pager)
• time range for receiving calls at phone numbers or extensions (Pagers are
notified any time there is a qualifying message.)
• types of message you want to receive (all new messages, or just messages
marked urgent)
Note: The restrictions that apply to your telephone line also apply to Off-premise
Message Notification numbers. For example, if you are unable to dial long
distance phone numbers from your telephone, you cannot have a long
distance Off-premise Message Notification destination number.
Setting up Off-premise Message Notification to a phone number
When you set up Off-premise Message Notification, you can add special characters
to the destination phone number. Refer to:
• Adding special characters to the destination number on page 58
• Optimizing Outbound Transfer on page 60
To set up Off-premise Message Notification to one phone number for the first time:
1. Press ƒ
·°⁄
to open your mailbox.
2. Enter your mailbox password and press
OK
or
£
.
3. Press
ADMIN
or
°
.
4. Press
fl
to open the Off-premise Message
Notification menu.
5. Press
ADMIN
or
⁄
to set up Off-premise Message
Notification.
6. Press
PHONE
or
⁄
to choose a phone number
destination.
7. Enter the destination phone number and press
OK
or
£
. The destination phone number is a maximum of
30 digits.
Pswd:
OTHR RETRY OK
0 new 0 saved
PLAY REC ADMIN
Mailbox admin
GREET PSWD QUIT
Msg notify
ADMIN
SELECT
Destination:
PHONE EXT PAGER
Ph:
RETRY OK