Filter
Top Products
12 Using Enterprise Edge Voice Messaging
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
For instance, the following display shows the
Name:
command line prompt:
When you begin to enter the last name, the
Name:
command line prompt disappears.
For example, if you are entering the name Partridge, you press the dialpad button
‡
for P, and the display drops the
Name:
prompt.
The command line prompt is still not shown on the display after you enter the entire
name, although the name is only nine characters.
Enterprise Edge Voice Messaging voice prompts
All Enterprise Edge telephones provide voice prompts.
The voice prompt tells you the dialpad button to press to use different Enterprise
Edge Voice Messaging options. Voice prompts provide the same options as display
buttons. Prompts also provide options that do not appear on the display. If you are
using an Enterprise Edge two line display telephone, you can use either the display
button or the dialpad button to access the option.
On an Enterprise Edge one line display telephone the voice prompt plays
immediately. If you do not choose an option after five seconds, the voice prompt
replays the options. If you still do not choose an option, Enterprise Edge Voice
Messaging ends the session.
On an Enterprise Edge two line display telephone the voice prompt plays after a
five-second delay. If you do not choose an option, Enterprise Edge Voice
Messaging ends the session.
Interrupting a voice prompt
You can interrupt a voice prompt by selecting any option on the display or dialpad.
You can also interrupt a voice prompt by pressing
£
. You cannot interrupt a voice
prompt that is informing you of an error.
Name:
RETRY BKSP OK
P
RETRY BKSP OK
PARTRIDGE
RETRY BKSP OK