Filter
Top Products
10 Using Enterprise Edge Voice Messaging
Enterprise Edge Voice Messaging Reference Guide P0908524 Issue 01
Enterprise Edge two line display telephones
Enterprise Edge two line display telephones show you Enterprise Edge Voice
Messaging commands and options. All system administration tasks, such as setting
up a Group List, require a two-line display telephone.
Enterprise Edge two line displays can show up to three display button options at a
time. In cases where there are more options, wait for the voice prompt to state the
other available options. If you know the corresponding dialpad number for the
option you want, you can press it any time during the voice prompt.
Press
•
to return to the previous display prompt.
An example of the Enterprise Edge Voice Messaging two-line display is shown in
the following Enterprise Edge two line display illustration.
Enterprise Edge two line display
Alternate extensions
You can have up to two Alternate extensions for your mailbox. If a caller dials the
main extension (an extension that has Alternate extensions assigned), the call rings
only at the main extension.
If the call is not answered and a message is left, a message indicator appears at the
main extension and at the Alternate extension(s). You can access the message from
the Alternate extension(s) with ƒ
·°⁄
, the same way that you usually
access messages from your main extension telephone.
If an Alternate extension is assigned to a telephone that has Caller ID (CLID) and
Display Caller enabled, CLID information displays and an audible tone occurs at all
telephones when the call goes to Enterprise Edge Voice Messaging. (For
information on enabling Display Caller refer to Call Forward with Caller ID (CLID)
on page 52.) The message can be intercepted using the Interrupt Feature,
ƒ
·°‡
, at all telephones as long as the caller is still leaving a
message.
Pswd:
OTHR RETRY OK
Display command line
Display button options
Display buttons