Filter
Top Products
Transferring calls 59
P0908524 Issue 01 Enterprise Edge Voice Messaging Reference Guide
To add special characters on an Enterprise Edge one line display telephone, refer to
the table Adding special characters using an Enterprise Edge one line display
telephone. To add special characters on a two-line display telephone, refer to the
table Adding special characters using an Enterprise Edge two line display
telephone.
Table 4 Adding special characters using an Enterprise Edge one line display telephone
Adding special characters using an Enterprise Edge two line display telephone
Press Description
¤
to retry or add digits to the destination phone number.
‹
to enter a timed pause that appears as
P
on the display. Pauses are four seconds
long.
›
to recognize dial tone (behind PBX). The Recognize Dial Tone special
character appears as
D
on the display.
fi
to enter a #.
fl
to enter a
*
.
•
to cancel and retry.
Press Description
•
to cancel and retry.
DIGS
or
¤
to retry or add digits to the destination phone number.
PAUS
or
‹
to enter a timed pause that appears as
P
on the display. Pauses are
four seconds long.
OTHR
to go to the next display to enter the following special characters:
TONE
to recognize dial tone (behind PBX). The Recognize Dial Tone
special character appears as
D
on the display.
#
to enter a #.
*
to enter a *.