Filter
Top Products
NEAX2000 IVS
2
ISDN System Manual
Page 86 ND-70919 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Feature Programming
SID to Network-Present/
CPN to Network-Present
For providing the Calling Party Number (CPN)
to the network, do the following programming:
• When Dial-In service is provided:
• When ISDN (BRI) Terminals are used:
DESCRIPTION DATA
Assign an ISDN Subscriber number and
ISDN Local Office Code Table number to
required stations.
NOTE 1
•
(1)
(2)
YY=12
X-XXXXXXXX: Station No.
X-XXXX: ISDN Subscriber No.
•
(1)
(2)
YY=13
X-XXXXXXXX: Station No.
00-14: ISDN Local Office Code Table
No. 00-14
Specify the facility control of CPN (Calling
Party Number).
•
(1)
(2)
YY=25
X-XXXXXXXX: Station No.
0 : To provide
1 : Not provided
Assign ISDN Local Office Code to the
Table number assigned by CM12 YY=13.
•
(1)
(2)
YY=05
00-14: ISDN Local Office Code Table
No. 00-14
X...X: Local Office Code
(Max. 12 digits)
DESCRIPTION DATA
Allow the ISDN Terminal to send the CPN
to network without using PBX
programming.
(1)
(2)
434
0 : CPN set in ISDN Terminal
1 : CPN assigned by CM12 YY=12,
13
DIAL “516-555-4210#”
(214-555-5000)
(214-555-5001)
(214-555-5002)
CALLING PARTY No.
DTI
PBX
ISDN
516-555-4210
+214-555-5000
CALLING PARTY No.
4210
START
CM12
END
CM13
CM50
NOTE 2
START
CM08
END