Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 135
Tandem Connection Programming
• When providing Tandem Connection (ISDN to CCIS/CCIS to ISDN), do the following
programming:
DESCRIPTION DATA
Specify the combination of trunk routes
allowing the tandem connection.
NOTE: The Home-Side Virtual Tie line
routes must be included for all
Tandem combinations.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ: 00-63: Outgoing Trunk Route
0 : Allowed
1: Restricted
Tandem connection by station or
attendant.
(1)
(2)
028
0 : Available
1 : Not available
START
CM36
END
CM08