Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 113
(3) Direct In Termination (DIT)
When the ISDN line station number is assigned as the destination of DIT, the call from ISDN
terminates all ISDN Terminals on the same bus (2B + D) simultaneously.
In addition to the programming of "Point-to-Multipoint Connection" on Page 105, do the
following programming:
DESCRIPTION DATA
Assign the data for DIT to the trunk num-
bers assigned by CM07.
•
•
•
•
(1)
(2)
YY=02 Day Mode
YY=03 Night Mode
YY=40 Mode A
YY=41 Mode B
000-255: Trunk No. assigned by CM07
Y=01
04: Direct-In Termination
Assign the ISDN Terminal station number
to be terminated by Direct In Termination.
•
•
•
•
(1)
(2)
YY=04 Day Mode
YY=05 Night Mode
YY=42 Mode A
YY=43 Mode B
000-255: Trunk No. assigned by CM07
Y=01
X-XXXXXXXX: ISDN Terminal Station
No.
ISDN
ISDN Terminal
Station No. 407
ISDN Terminal
Station No. 400
ISDN Line
Station No. 7880
ILC TRK
PBX
214-555-7880
(Office No.)
START
CM30
END