Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN-BRI Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 81
• When providing Tandem Connection (ISDN to CCIS, CCIS to ISDN), do the following
programming:
• Specify whether the Calling Party Number (CPN) sent from ISDN is sent to the CCIS
network.
DESCRIPTION DATA
Specify the combination of trunk routes
allowing the tandem connection.
•
(1)
(2)
Y=0
XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ: 00-63: Outgoing Trunk Route
0 : Allowed
1: Restricted
Allow tandem connection by station or
attendant.
(1)
(2)
028
0: Available
DESCRIPTION DATA
Maximum number of digits sent to CCIS
network.
(1)
(2)
379
0: 24 digits
Activate IAI2 message for sending ISDN
CPN to CCIS network.
•
(1)
(2)
YY=26
0-7: CCIS Channel No.
0: Active
Allow sending of CPN to CCIS network. •
(1)
(2)
YY=28
0-7: CCIS Channel No.
0: Allowed
CM36
G
CM08
END
CM08
CMA7
END
START