Filter
Top Products
CHAPTER 2 INSTALLATION
Installation Procedure for ISDN-PRI
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 43
Mounting CONN Card
When using the CONN (PZ-M542/PZ-M557) card to connect a coaxial cable for DTI, do the
following installation:
(1) Confirm the correct switch settings of the CONN card. See CHAPTER 4.
(2) Connect the CONN card to LTC connector on BWB in the PIM which accommodates DTI
cards. For details, refer to the Installation Procedure Manual.