Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
Event Based CCIS Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 115
EVENT BASED CCIS PROGRAMMING
Programming Summary
Do the system data programming for Event Based CCIS according to the procedure shown in
Figure 3-2. As for the CCIS feature programming, refer to the CCIS System Manual.
Figure 3-1 shows an outline of BRI to BRI connections.
Figure 3-1 Outline of BRI to BRI Connections
Programming for PBX A and PBX B is required on each programming procedure.
BRI TRUNKS
MATE-SIDE TRUNKS
V
O
I
C
E
CCH
HOME-SIDE TRUNKS
PBX A
BRI TRUNKS
MATE-SIDE TRUNKS
V
O
I
C
E
CCH
HOME-SIDE TRUNKS
PBX B
ISDN
NETWORK