Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Feature Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 91
ISDN PRI Call By Call Service Selection
[North America Only]
Available Services
The following Binary Facility Code can be sent to the ISDN network when the called party number
is flagged as a Service. Services and features are selected by the ISDN subscriber at the time
the ISDN is ordered. The PBX must be programmed to match the services and features provided
by the ISDN provider.
AT&T Northern Telecom
SDN Private
Megacom InWATS
Megacom 800 OutWATS
Accunet Foreign Exchange
International 800 Tie Trunk
AT&T MultiQuest
Call By Call LCR Programming
The following programming steps is an example of a long-distance call placed to any area code
that begins with a 2 and that call is flagged as AT&T Megacom.
CM8A4005>12 (dialed #)=0001 (go to route pattern 001)
CM8A0001>1 (1
st
choice)=00010 (use LCR pattern 000 + trk route 10)
CM855>12=11 (maximum number of digits dialed)
CM8A5000>157=02 (Kind of called party=National)
(dialed number is 10-digit NANP, select National)
CM8A5000>158=01 (Called party Number Plan ID=ISDN/Telephony Numbering Plan)
CM8A5000>159~161 are not used for this call.
CM8A5000>162=1 (Service)
CM8A5000>163=03 (Megacom)
CM8A5000>164 is not required for this call.