Filter
Top Products
CHAPTER 2 INSTALLATION
Installation Procedure for ISDN-PRI
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 47
Cable Connection via CONN Card
When you use a coaxial cable, connect the cable to a NT1 equipment via the CONN (PZ-M542/
PZ-M557) card as shown in Figure 2-6.
Figure 2-7 shows an example of the cable connection when the DTI/PRT card is mounted on the
AP05 slot of PIM0.
Figure 2-6 Cable Connection via the CONN Card
NT1
LTC0/LTC1/LTC2/LTC3 CONNECTOR
COAXIAL CABLE
DTI/PRT
BWB
PBX
MAX. 6 dB loss at 1024 kHz
CONN