Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Terminal Data Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 103
ICH Assignment
DESCRIPTION DATA
Assign an AP number to each ICH card
(PN-SC03). The AP number must match
the SENS switch setting on the ICH card.
•
(1)
(2)
Y=0
04-15: AP No.
13: ICH card
Assign the ICH number to the AP number
of ICH assigned by CM05.
•
(1)
(2)
YY=09
00-15: ICH No.
04-15: AP No. assigned by CM05
Assign the ISDN line station number to the
ISDN line number of ICH card.
•
(1)
(2)
YY=00
XX Z
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
X-XXXXXXXX: ISDN Line Station No.
Specify the method of TEI (Terminal End-
point Identifier) assignment.
NOTE: CMAC YY=02 must be assigned
to match the specification of ISDN
Terminal.
•
(1)
(2)
YY=02
XX Z
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
0 : Manual TEI Assignment
1 : Automatic TEI Assignment
Specify the method of Layer 1 activation.
NOTE: CMAC Y=04 must be assigned to
match the specification of ISDN
Terminal.
•
(1)
(2)
YY=04
XX Z
XX: 00-15: ICH No.
Z : 0-7: ISDN Line No. of ICH card
0 : Always activated
1 : Activated by call event
Assign the ISDN Protocol Type to the AP
number assigned by CM05.
•
(1)
(2)
YY=06
04-15: AP No. of ICH assigned by
CM05
24 : ETSI Terminal
63 : Not ETSI Terminal
CM06
START
CM05
CMAC
CMAA
END
INITIAL
INITIAL
INITIAL
INITIAL
INITIAL
INITIAL