Filter
Top Products
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN-PRI Programming
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0
Page 65
ISDN-PRI PROGRAMMING
Digital Trunk Data Assignment
DESCRIPTION DATA
Assign an AP number to the DTI/PRT
card.
The AP number must match the SENSE
switch setting on the DTI/PRT card.
•
(1)
(2)
Y=0
04-15, 20-31: AP No.
09: DTI card
12: PRT card
Specify the AP highway channel for 24DTI/
PRT card.
•
(1)
(2)
Y=1
04-15, 20-31: AP No.
0 : Expanded Highway channel
(128 time slots)
1 : Basic Highway channel
(128 time slots)
Assign trunk numbers to each channel
number on the DTI/PRT card.
The system allocates time slots to
consecutive channels from lowest to
highest channel number assigned. To
minimize the number of time slots
allocated, assign trunk numbers to the
consecutive channels on each card.
Never skip channels in CM07.
•
(1)
(2)
YY=01
XX ZZ
XX: 04-15, 20-31: AP No. assigned by
CM05
ZZ: 00-23: Channel No. of 24DTI/PRT
01-15, 17-31: Channel No. of
30DTI
D000-D255: Trunk No.
Any trunk No. already assigned by
CM10 cannot be used.
Allow second Dial Tone when dialing
access code assigned by CM20 for ISDN
B channel route.
•
(1)
(2)
Y=2
04
0 : For ISDN trunk route, 2
nd
Dial Tone
is provided.
1: No 2
nd
Dial Tone
CM07
START
CM05
A
CM48
INITIAL
INITIAL
INITIAL