Filter
Top Products
NEAX2000 IVS
2
ISDN System Manual
Page 84 ND-70919 (E), Issue 1.0
CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Feature Programming
DESCRIPTION DATA
•
(1)
(2)
YY=18 Received Digit Conversion
00-63: Trunk Route No.
0 : Provided
1 : Not provided
Assign the destination of DID Call
transferred when the station is busy/
unassigned/no answer.
•
•
•
(1)
(2)
YY=00 No Answer
YY=03 Busy
YY=06 Unassigned
00-63: Tenant No.
Destination:
X-XXXXXXXX: Station No.
E000 : Attendant Console
EBXXX: Announcement Service:
Digital Announcement Trunk
No. set by CM10
Assign the Number Conversion Block No. •
(1)
(2)
YY=00
X-XXXX: DID No.
000-999: Number Conversion Block
No.
When the data for CM35 YY=18 is set to
“0” (Received digit conversion is to be
provided), assign the data for interpreting
the digits received.
•
•
•
•
(1)
(2)
YY=01 Day Mode
YY=02 Night Mode
YY=03 Mode A
YY=04 Mode B
000-999: Number Conversion Block
No. assigned by CM76
YY=00.
X-XXXXXXXX: Station/Data station/
ISDN line station No. to
be terminated
DXX: Change Terminating System to:
D04: Direct-in Termination
D14: Attendant Console
CM35
A
CM51
END
CM76