ADMINISTRATION
System 85 and DEFINITY G2
DO NOT
ASSIGN FEATURES
SWITCH
RELEASE
BUTTONS THAT
DO NOT EXIST*
TERMINAL ALIASED AS
TO BUTTON(S)
7401D 7403D R2V1—R2V3 12 —
7406D01A— 7405D 8—12,
7406D04A (Note 1)
R2V1—R2V3
31—36
—
7405D 8—12, 14, 15
7406D05A, (Note 1)
R2V1—R2V3
31—36 (Note 2)
7406D06A 14, 15
Self R2V4—G2 —
(Note 2)
R2V2—R2V4
(Note 3)
24 and 30
(Note 4)
CALLMASTER II & III 602 CALLMASTER 9—12
* Do not assign features to these buttons.
Notes:
1. 7406D02A, 7406D04A, and 7406D06A aliased as 7405D;
7406D02A, 7406D04A, and 7406D06A w/ 7400B Plus aliased as 7405D w/ DM;
7406D01A, 7406D03A, and 7406D05A aliased as 7405D w/ DD;
7406D01A, 7406D03A, and 7406D05A w/ 7400B Plus aliased as 7405D w/ DM and DD;
7406D01A and 7406D02A w/ Z703A DSU aliased as 7405D w/ DM and DD.
2. Reserved for Speaker and Mute.
3. Not supported in R2V1.
4. These buttons are used for the Log In and Release features.
PC/ISDN Platform (DEFINITY G2). To administer the PC/ISDN Platform, the Generalized Ter-
minal Administration (GTA) capability of DEFINITY G2 must be used. Below is an overview of
how to administer it. See the
PC/ISDN Installation and Reference Manual
for detailed instruc-
tions.
PC/ISDN Administration on DEFINITY G2. Ordinary BRI terminals used with DEFINITY G2
require initialization. They also support Maintenance Information Messages (MIMs). Because
PC/ISDN supports neither MIMs nor terminal initialization, the system administrator must have
created a
terminal type
for each type of terminal being used with PC/ISDN. If the terminal is to
have an associated display, the display type must be changed to
6
for
personal computer
. Each
terminal thus created is simply a copy of the terminal type for the terminal at hand with the
ISDN-MIM feature set to
None
and the display type set to
6
. For example, if the terminal to be
administered is an AT&T model 7507, the system administrator might copy the 7507 terminal
(type 57) to a new terminal type (e.g., type 157) and modify it to exclude support of the ISDN-
MIM feature.
2-50