Filter
Top Products
CALLMASTER and CALLMASTER II and III Voice Terminals
500 Series Telephone
The 500 telephone is a single appearance analog rotary dial telephone which provides cost-
effective service wherever it is located. It provides limited access to features because the rotary
dial has no * or # positions.
Applications
The 500 telephone can be used with the DEFINITY G1, G2, G3, System 75, and System 85.
This telephone is especially suitable for manufacturing, warehousing, guard stations, or power
failure locations.
Physical Description
Dimensions
Note: The following dimensions are approximate.
Width = 7 inches
Depth (front to back) = 8-3/4 inches
Height (maximum with handset in place) = 5-1/2 inches
Physical Features
Handset
The 500 telephone is equipped with a G-type handset.
Dial pad
The 500 telephone is equipped with a 10-hole rotary dial.
3-317