Filter
Top Products
8101 Telephone
REDIAL button
Can be used for redialing the last number dialed from the dial pad, either an extension or
an outside number. The number redialed can be up to 20 digits.
HOLD button
Used for putting a call on hold. If users want to put a call on hold and place another call,
they must use the system Hold feature by using the FLASH button.
Message Light
The red Message light flashes when a message is left for the user. It goes off when the user
retrieves the message. The Message light also serves as a visual ringing indicator by flashing
quickly while the telephone is ringing.
Designation Card
On the front of the 8101, there is a designation card on which the user can write frequently-dialed
telephone numbers and extensions.
Other Physical Features
Ringing
The 8101 telephone has electronic tone ringing. The ringer volume control is a 3-position switch
on the right side of the housing.
Positive Disconnect
The 8101 has a switch with which the user can select positive disconnect or turn it off. In the ON
position, this switch hangs up the phone for approximately two seconds, even if the switchhook
depression is for a shorter duration. This action prevents inadvertent switchhook flashes. To ini-
tiate a switchhook flash in this mode, the FLASH button must be pressed. In the OFF position,
switchhook functioning is normal.
3-350