AT&T System 85 Telephone User Manual


 
7434D Voice Terminal
TRANSFER button
DROP button
HOLD button
Note: The DISCONNECT and RECALL buttons found on some earlier 7400 Series
voice terminals have been removed from the 7434D voice terminal. A
RECALL button can be assigned on an administrable button if needed.
SELECT RING button—a special fixed feature button that has two functions:
When used with the * dial pad key, it allows the user to select one of eight personalized
ringing patterns for incoming calls.
When used with the DROP button, it allows the user to test the lights, ringer, and display
module (if installed) of the voice terminal. The Select Ring test function replaces the
Self-Test switch found on most other terminals.
The associated Select Ring light goes on steadily when the button is pressed to activate
either function. It winks when the user is stepping through the ringing patterns.
Administrable Buttons
The 7434D voice terminal has 34 call appearance/feature buttons (R2V1 and R2V2 only), each
equipped with a triangular red light and a square green status light. Usually, at least three of
these buttons (the top three in the leftmost column) are administered as call appearances for the
terminal’s primary extension number, where calls are placed and answered. The rest of the but-
tons can be used for more call appearances (including bridged appearances of other stations’
extensions) and features. Buttons administered for features have only their status lights active.
Message light
The green light goes on when a message is left for the terminal user. It goes off when the user
retrieves the message.
Other Physical Features
Handset
The 7434D voice terminal is equipped with an R-type handset.
3-216