AT&T System 85 Telephone User Manual


 
7205H Voice Terminal
Ringing
The 7205H voice terminal has electronic tone ringing. The volume control is on the left side of
the housing.
Mounting Options
The 7205H voice terminal comes equipped with a nonadjustable desk stand. An optional wall
mounting kit can be ordered.
Color Options
The 7205H voice terminal was available in various colors; however, maintenance replacements
will be black only.
Distance Limitations
The maximum allowable distances of a 7205H voice terminal from the System 85 and DEFINITY
G2 cabinet are shown in the following table.
NOMINAL MAXIMUM RANGE
IN FEET (METERS)
SYSTEM PORT BOARD ADJUNCTS
24 AWG 26 AWG
SYSTEM 85 SN224 0 3,000 (915) 2,300 (700)
DEFINITY G2 1 1,750 (533) 1,100 (335)
2 1,000 (305) 750 (288)
Power Requirements
The 7205H voice terminal is powered by the tip and ring leads. If the 7205H is equipped with the
S101A speakerphone or the 500A headset adapter, auxiliary power will be required for the
adjunct. Refer to the ADJUNCT POWER section of this manual.
The C201A call coverage module attaches to the top of the voice terminal, and the F201A func-
tion key module attaches to the right side. These optional modules use the same phantom power
from the switch (through the digital pairs) that also powers the 7205H voice terminal. This
impacts the distance allowed from the switch.
3-67