Filter
Top Products
CALLMASTER and CALLMASTER II and III Voice Terminals
Handset
An optional K-type handset kit is available for the CALLMASTER voice terminals. This kit con-
tains a handset cradle, a handset, and the required adapter. The handset plugs into the headset
jack and functions as though a headset was being used. This handset does not provide
switchhook capabilities.
Dial pad
The CALLMASTER voice terminals are equipped with a 12-button touch-tone dial pad.
Jacks
The CALLMASTER voice terminals’ housing contains three jacks. The mounting cord jack is
located on the rear of the unit. Two PJ327 type (2-prong) jacks allow the headset or optional
handset to be plugged into either side of the unit. The CALLMASTER II and III also have an
Adjunct jack located on the back of the voice terminal.
Cords
A D8W-87 line cord (7 feet long) is provided with all CALLMASTER voice terminals.
Kneewell Adapter (602 CALLMASTER only)
An optional adapter is available for connecting two headsets or handsets to the
602 CALLMASTER. This adapter allows the handset or headset to be connected without the
cords running across the top of the desk.
Ringing
The CALLMASTER voice terminals have electronic tone ringing with patterns that are set at
administration.
Mounting Options
The CALLMASTER voice terminals are only available as a desk model. It cannot be wall
mounted.
Color Options
The 602 CALLMASTER is available in black and misty cream. The CALLMASTER II and III
sets are available in black, misty cream, and white.
3-306